Practice for prefect & pass for sure

Above all, we have known the importance of the GB0-371-ENU certification. Now the question we face is how to pass the GB0-371-ENU exam test successfully. The key to success is your proficiency of related IT technology and your application ability in troubleshooting. Generally, our personal ability from your normal course is very limited and your knowledge is messy. Thus, GB0-371-ENU sure exam study guide is necessary to your review, which will clear your confusion and guide you to a better studying.

First, H3C GB0-371-ENU sure practice bootcamp can be a good reference in your preparation. When you visit our site, you will find three different modes of GB0-371-ENU sure practice dumps which can meet different people's need. If you are tired of the screen study, the GB0-371-ENU pass4sure pdf version is suitable for you because it can be printed into papers which are convenient to do marks. With the papers materials you can do note as you like, and practice the exam dumps at will. For the people who have less time and no extra energy, GB0-371-ENU pass4sure SOFT & APP version must be the best choice, which can give you rapid mastery and interactive experience. When you get the GB0-371-ENU practice questions, you must try your utmost to study by heart not just simply remember he questions & answers only.

Besides, there is no doubt that the GB0-371-ENU pass4sure dumps are with high-quality and best-validity. We have a strong professional team dedicated to the research of GB0-371-ENU practice questions. The quality and quantities of GB0-371-ENU pass4sure dumps are strictly checked and controlled by the experts. We aim to make the best useful GB0-371-ENU pass4sure questions & answers and bring you the latest information about GB0-371-ENU actual test. With the useful practice dumps and high-quality, you can pass the GB0-371-ENU actual test for sure.

Instant download

Before buying the dumps, many customers may ask how to get the GB0-371-ENU sure practice bootcamp they buy. It is very easy to get. An email attached with the dumps will be sent to you as soon as you pay, so you can download the H3C GB0-371-ENU practice dumps immediately, then devote yourself in the study with no time waste.

In IT industry or to IT practitioner, H3CSE-Routing & Switching GB0-371-ENU certification is much more than a piece of paper. When an IT corporation recruits professional employees, they must hope the employee is skillful and professional enough to contribute to a smooth operation with low-risk and more benefits. Increasingly, H3CSE-Routing & Switching GB0-371-ENU exam certification is playing an important role in the IT industry, and drives tangible benefits for the owner and company. A person certified by GB0-371-ENU certification can mitigate risk by completing more projects on time and within budget and understand the software inside and out, which leads to higher user acceptance and creates more profits. So if you have gained the H3CSE-Routing & Switching GB0-371-ENU certification (Constructing H3C High-Performance Campus Networks), you may have chance to enter into a big IT company, and you will get a rich reward along with a higher positions when you create value for the company. Everyone wants to build a better life and have bright future, so it is natural to chase after GB0-371-ENU certification. But the people around you may try to attend the GB0-371-ENU actual exam for several times and fail all the time. Do not be afraid, although it is hard to pass, there is always ways to overcome and get success. Here, you can get some reference for your GB0-371-ENU exam preparation.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. In the PIM-DM network as shown in the figure, part of the unicast routing table of routers RT1 and RT2 is as follows:
<RT1>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24xxxxP1-1 C1-110.1.1.1POI11
1.1.0.0/16xxxxP1-2 C1-210.1.1.1Port1
<RT2>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24XXXX P2-1 C2-111.1.1.1Port2
1.1.1.1/32XXXX P2-2 C2-211.1.1.1Port2
Then, when routers RT1 and RT2 perform Assert, the winner should be

A) If P1-1=P2-2, C1-1>C2-2, then RT2 wins
B) If P1-1=P2-2, C1-1=C2-2, then RT2 wins
C) If P1-1<P2-1, C1-1<C2-1, RT1 wins
D) If P1-1<P2-2, C1-1<C2-2, RT2 wins
E) If P1-1=P2-1, C1-1>C2-1, then RT1 wins
F) If P1-1=P2-1, C1-1=C2-1, then RT1 wins

2. There are multiple IGMPv2 group member hosts (Client1/Client2/Client3) in the shared network segment, and multiple IGMPv2 routers (Router1/Router2), as shown in the following figure:
||192.168.207.254 192.168.207.253
|| Router1 Router2
||+++++
||111
|| III
||Clientl Client2 Client3
||192.168.207.1 192.168.207.2192.168.207.3 Then, the following statement is correct

A) After the host receives the general group query message, Client1, Client2, and Client3 may all send the corresponding
B) After the host receives the general group query message, Clientl sending the Report message for joining Group A will not inhibit the Report message for Client2 joining Group B
C) Only Router2 periodically sends general group queries to the shared network segment
D) Only Router1 periodically sends general group queries to the shared network segment
E) Routerl and Router2 periodically send general group queries to the shared network segment
F) After the host receives the query message, only Client1 sends the Report message

3. When the IGMPV2 host leaves a multicast group, it will send a LeaveGroup message, which is correct as follows:

A) The destination address of the Leave message is the same as the GroupAddress address in the message
B) The query router immediately sends a specific group query message after receiving the Leave message
C) The query router immediately deletes the multicast group entry of the related Group after receiving the Leave message
D) The destination address of the Leave message is 224.0.0.2

4. In the networking shown in the figure, the PIM SM protocol runs between RT1, RT2 and RT3, the RP is 1.1.1.1, and there is a downstream receiver RT3 connected to a multicast source, check the RT3 unicast routing table as follows:
[RT3]display ip routing-table
Routing Tables: Public
Destinations: 10 Routes: 10
Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/320SPF 10 1562 192.168.0.1 S0/2/0
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
192.168.0.0/30Direct 00192.168.0.2 S0/2/0
192.168.0.1/32Direct 00192.168.0.1 S0/2/0
192.168.0.2/32Direct 00127.0.0.1 InLoopO
192.168.1.0/300SPF 10 3124 192.168.2.1 so/2/1
192.168.2.0/30Direct 00192.168.2.2 so/2/1
192.168.2.1/32Direct 00192.168.2.1 so/2/1
192.168.2.2/32Direct 00127.0.0.1 InLoopO
Then, after the RP sends the registration stop message, which of the following routers have (S, G) entries?

A) RT1
B) RT2
C) RT3

5. Regarding the BPDU format of MSTP, the correct statement is

A) If the switch is not configured with VLAN to instance mapping, MSTBPDU will not carry any MSTI configuration message
B) MSTI specifies that the port priority field is 2 bytes in length, including 1 byte of port priority and 1 byte of port number
C) The MSTI calculation process will use the timer value in RSTBPDU instead of carrying the timer parameter in each MSTI configuration message
D) MSTI specifies that the bridge priority field has a length of 8 bytes, including two bytes of bridge priority and 6 bytes of bridge MAC address

Solutions: