100% Updated EMC D-NWR-DY-23 Enterprise PDF Dumps [Q350-Q375]

100% Updated EMC D-NWR-DY-23 Enterprise PDF Dumps

Use Valid Exam D-NWR-DY-23 by PracticeDump Books For Free Website

NEW QUESTION # 350
A CloudBoost appliance has been deployed in AWS.
What can be used to configure and manage the CloudBoost appliance?

• A. AWS Cloud portal
• B. Multiple Systems Management
• C. NetWorker Management Console
• D. On-prem CloudBoost Management Console

Answer: D

NEW QUESTION # 351
Which applications does Dell EMC NetWorker Snapshot Management support?

• A. Exchange, SQL, and SharePoint
• B. Exchange, SQL, and Hyper-V
• C. DB2, Oracle, and SAP with Oracle
• D. DB2, SQL, and SAP with SQL

Answer: C

NEW QUESTION # 352
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data.
What is the reason for this behavior?

• A. Mount point backups require the extended client
• B. The save command did not include the -x option.
• C. NetWorker does not support Linux mount point backup.
• D. The save command did not include the -X option.

Answer: C

NEW QUESTION # 353
An administrator is configuring Dell EMC NetWorker for a client. They configured 2 NetWorker service ports. The backup is failing.
What needs to be corrected?

• A. The number of service ports needs to be increased
• B. Unblock the local ports on the firewall
• C. The user should be authorized to configure service ports
• D. The number of connection ports needs to be increased

Answer: A

NEW QUESTION # 354
Which tool must be used to migrate the NMC database when upgrading to NetWorker 9?

• A. nmcconvert
• B. nmcmigrate
• C. gstdbconvert
• D. gstdbunload

Answer: D

NEW QUESTION # 355
An EMC NetWorker server has been configured to back up to an AFTD. The volume reaches full capacity.
What is the result of this condition?

• A. Volume is marked as full and NetWorker suspends all saves directed to the device
• B. Volume is not marked as full; a message is displayed stating that the file system requires more space
• C. Volume is marked as full and continues to back up to either a disk or tape volume
• D. Volume is not marked as full, a save set being written to the AFTD continues to another volume

Answer: B

NEW QUESTION # 356
A Dell EMC NetWorker administrator configured their backups for save set "C:Users" to run daily at
12:00 PM with levels based on the exhibit.

At 1:00 AM on Day 3, file "C:UsersJohnmyscript.txt" was deleted. At 5:00 PM on Day 4, folder
"C:UsersJohn" was renamed to "C:UserJohn_old".
On Day 7, the administrator decided to recover the entire save set back to Day 6. Based on this environment, which result can be expected?

• A. myscript.txt file will not be recovered under "C:UsersJohn"
• B. myscript.txt file will be recovered under "C:UserJohn_old"
• C. myscript.txt file will be recovered under "C:UsersJohn"
• D. myscript.txt file will not be recovered under "C:UserJohn_old"

Answer: C

NEW QUESTION # 357
An EMC NetWorker customer has an autochanger with four LTO-3 tape drives. All four drives are configured to a NetWorker server. Two drives are dynamically shared with a NetWorker storage node.
One of the shared drives suffers a mechanical failure and is disabled.
How many nsrmmd processes need to be running on the NetWorker server?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

NEW QUESTION # 358
During a backup, which EMC NetWorker host is responsible for tracking the number of clone copies?

• A. Storage Node
• B. Console
• C. Client
• D. Server

Answer: A

NEW QUESTION # 359
What is a characteristic of a Dell EMC NetWorker data protection policy?

• A. Actions that can be performed
• B. Data source to protect
• C. Group of workflows
• D. Data protection operation

Answer: C

NEW QUESTION # 360
A Dell EMC NetWorker solution will be implemented that consists of two NetWorker servers and a single NetWorker Management Console (NMC). The NMC will be installed on only one of the NetWorker servers.
To allow management of both servers from the NMC, which command must be executed and on which NetWorker server?

• A. nsraddadmin; server where NMC is installed
• B. nsrauthtrust; server where NMC is installed
• C. nsraddadmin; server where NMC is not installed
• D. nsrauthtrust; server where NMC is not installed

Answer: D

NEW QUESTION # 361
In an EMC NetWorker backup environment, what happens when you try to clone a volume to which backups are currently being written?

• A. NetWorker skips the clone operation for save sets on the volume in use and continues to clone other save sets.
• B. Backup is suspended to the source volume for the duration of cloning.
• C. Clone operation waits for the source volume to finish writing.
• D. Clone operation exits with the following error: source volume in use.

Answer: C

NEW QUESTION # 362
Which method would you use to recover a file to its same location when the entry for that file no longer exists in the client file index?

• A. Clone
• B. Recoverpsm
• C. Save set
• D. Browsable

Answer: C

NEW QUESTION # 363
An administrator has created a workflow with a protection group consisting of a single Linux client.
The client is enabled for block based backups. The workflow has actions to perform a backup to an AFTD device and then a clone to tape.
What is the result when the workflow runs?

• A. Workflow should fail since cloning block based backups to tape is not supported
• B. Workflow should complete successfully
• C. Workflow should fail since block based backups must target Data Domain devices
• D. Workflow should fail since block based backups do not support Linux clients

Answer: B

NEW QUESTION # 364
What is an EMC NetWorker consolidated backup?

• A. A level 9 backup which is then merged with the save set's last full backup creating a new full backup.
• B. A level Full backup which is then merged with the save set's last full backup creating a new full backup.
• C. A level 1 backup which is then merged with the save set's last full backup creating a new full backup.
• D. An Incremental level backup which is then merged with the save set's last full backup creating a new full backup.

Answer: C

NEW QUESTION # 365
Using EMC NetWorker Module for Microsoft Applications, an EMC NetWorker administrator backs up a Microsoft Exchange server which resides on an EMC CLARiiON disk array.
What best describes supported features in this case?

• A. Server-less backup is not supported.
• B. Manual backup is supported.
• C. Server-less backup is supported.
• D. Rollback recovery is not supported.

Answer: C

NEW QUESTION # 366
What is one of the features available with VADP (vStorage APIs for Data Protection) in EMC NetWorker?

• A. Option to leverage change block tracking (CBT) feature.
• B. EMC NetWorker VADP proxy can be a physical server only.
• C. File level recovery is available from Linux image level .vmdk backups.
• D. Single Step VM Recovery to the original machine only.

Answer: A

NEW QUESTION # 367
What is a characteristic of NMM Microsoft SQL VSS?

• A. Full and incremental backups are supported
• B. Backup and recovery granularity is only available at the database level
• C. Directed recoveries can be performed only to different hosts
• D. Only databases in SQL simple recovery mode are supported

Answer: D

NEW QUESTION # 368
Which EMC NetWorker process keeps a record of TCP/IP port ranges?

• A. nsrexecd
• B. nsrd
• C. nsrmmdbd
• D. nsrpm

Answer: A

NEW QUESTION # 369
By default, what is the username for the NMC server database in Dell EMC NetWorker?

• A. administrator
• B. admin
• C. networker
• D. postgres

Answer: D

NEW QUESTION # 370
Which EMC NetWorker host can belong to multiple data zones?

• A. Remote Storage Node
• B. Client
• C. Storage Node
• D. Server

Answer: B

NEW QUESTION # 371
Which NetWorker module must be installed on a NetWorker client running an SAP R/3 on Microsoft SQL to ensure it is backed up properly without a need to shut down the application?

• A. NMSAP
• B. NMM
• C. NMDA
• D. NMMEDI

Answer: B

NEW QUESTION # 372
Which are NetWorker modules?

• A. NMC and NSM
• B. NMM and NDMP
• C. NMDA and NMMEDI
• D. NMSQL and NMSAP

Answer: C

NEW QUESTION # 373
Which Dell EMC NetWorker database allows an administrator to browse backup details for a particular point in time?

• A. Resource database
• B. Jobs database
• C. Client File Index
• D. Media database

Answer: C

NEW QUESTION # 374
What is a benefit of using remote devices in Dell EMC NetWorker?

• A. Save backup time by using image-level backup processing
• B. Reduce the capacity requirements for backup storage
• C. Isolate groups of clients from other clients in the datazone
• D. Allow the backup workload to be distributed to multiple storage nodes

Answer: A

NEW QUESTION # 375
......

EMC D-NWR-DY-23 Official Cert Guide PDF: https://pass4sure.practicedump.com/D-NWR-DY-23-exam-questions.html