[Aug-2025] Use Real D-PDD-DY-23 Dumps - 100% Free D-PDD-DY-23 Exam Dumps
D-PDD-DY-23 PDF Dumps Exam Questions – Valid D-PDD-DY-23 Dumps
NEW QUESTION # 28
Two companies recently merged. They are consolidating and purchased three PowerProtect DD systems and Avamar protection software.
* One company is using ECS, Google Cloud and Salesforce cloud providers.
* The other is using Alibaba, IBM and Microsoft Azure cloud providers.
What is the maximum number of Cloud Tiers that can be created across the three PowerProtect DD systems by the Administrator?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Each PowerProtect DD system can support up to two Cloud Tiers. Therefore, with three PowerProtect DD systems, the maximum number of Cloud Tiers is calculated as follows:
2 Cloud Tiers per PowerProtect DD system X 3 PowerProtect DD systems = 6 Cloud Tiers total.
This configuration allows the administrator to utilize multiple cloud providers efficiently across the consolidated PowerProtect DD systems.
NEW QUESTION # 29
A backup administrator notices that the backups and replication are exceeding their backup window.
The system is also utilizing the DD Boost protocol.
They notice the system is experiencing slow performance and want to monitor performance in real-time.
Which command best accomplishes this task?
- A. ddboost show stats
- B. system show performance
- C. system show stats interval 2
- D. ddboost file-replication show stats
Answer: C
NEW QUESTION # 30
Which PowerProtect DD feature can be used if the existing backup solution is designed using a tape-based logic?
- A. DD VTL
- B. DD Retention Lock
- C. DD Boost
- D. BoostFS
Answer: A
NEW QUESTION # 31
A customer needs help deploying a shared PowerProtect DD. They ask for best practices when configuring SMT.
What network-related attributes must they configure to increase the security of each tenant unit?
- A. - Local Data Access IP addresses
- Remote Data Access IP Addresses
- Default Gateway
- Tenant Unit Firewall Ports - B. - Remote Data Access IP
- Addresses Default Gateway
- Tenant Unit Virtual Interfaces
- Tenant Unit Hostname - C. - Tenant Unit IP Addresses
- Tenant Unit Firewall Ports
- Remote Data Access IP
- Addresses Default Gateway - D. - Tenant unit Hostname
- Local Data Access IP addresses
- Remote Data Access IP Addresses
- Default Gateway
Answer: D
NEW QUESTION # 32
A PowerProtect DD system is configured to with VTL. The backup application requires a minimum tape capacity of 1.5 TiB.
What is the minimum tape type to support this requirement?
- A. LTO-3
- B. LTO-4
- C. LTO-5
- D. LTO-6
Answer: C
NEW QUESTION # 33
What is the data reduction ratio that can be predicted when applying best practices for deduplicating data on a PowerProtect DD?
- A. 65:1
- B. 45:1
- C. 50:1
- D. 55:1
Answer: C
Explanation:
Explanation: The expected data reduction ratio with PowerProtect DD, when following best practices for deduplication, is approximately 50:1. This high deduplication efficiency significantly reduces storage needs, making PowerProtect DD highly cost-effective. When best practices are applied for deduplication on PowerProtect DD systems, a data reduction ratio of 50:1 can typically be achieved. This means that for every
50 units of data, only 1 unit needs to be stored, significantly optimizing storage utilization. Achieving this ratio depends on factors such as data type, backup frequency, and the effectiveness of deduplication processes configured on the system. This high deduplication rate is a key advantage of PowerProtect DD appliances, allowing organizations to manage large volumes of backup data more efficiently.
NEW QUESTION # 34
What does the system setup wizard require to set up a VTL on a PowerProtect DD system?
- A. DHCP
- B. Gateway IP
- C. HBA
- D. WWPNs
Answer: D
NEW QUESTION # 35
How many hot spare drives does the DS60 have?
- A. 1, 2, 3, or 4
- B. 2, 4, 6, or 8
- C. 3, 6, 9, or 12
- D. The system uses distributed sparring instead of hot spares
Answer: A
NEW QUESTION # 36
Refer to the exhibit.
To which shelf and port should SAS HBA slot 1 port B be connected?
- A. Shelf 01 BH
- B. Shelf 01 BE
- C. Shelf 04 BE
- D. Shelf 04 BH
Answer: D
NEW QUESTION # 37
Task
Use the simulator to schedule PowerProtect DD space reclamation to occur every Monday at 4:00 AM without impacting system resources for more than 25%.
When you have finished, continue to the next question.
Answer:
Explanation:
See the solution in the explanation below.
Explanation:
To schedule space reclamation on a PowerProtect DD system as specified, here's the general procedure to follow in the DD System Manager:
* Log into DD System Manager: Access the management interface for your PowerProtect DD system.
* Navigate to Data Management: In the sidebar, look for an option labeled Data Management or similar (may vary slightly depending on the exact DD OS version).
* Select Space Reclamation: Within Data Management, find and select Space Reclamation settings.
* Set Schedule:
* Click on Schedule and choose to add a new schedule if not already present.
* Set the Day to Monday.
* Set the Time to 4:00 AM.
* Configure Resource Limit:
* Look for an option to limit the resource usage for the reclamation task.
* Set the Maximum System Resource Usage (or a similarly named option) to 25% to avoid impacting the system performance excessively.
* Save the Schedule: Confirm and save your settings.
* Verify the Schedule: Check that the schedule appears correctly in the list, indicating it will run every Monday at 4:00 AM with the specified resource usage limit.
After completing these steps, the PowerProtect DD system should reclaim space as scheduled without exceeding 25% resource usage, minimizing its impact on other system operations.
NEW QUESTION # 38
A backup administrator is investigating the File System Log of their source DD9900. They noticed an error on the file system and quickly corrected the issue. However, 30 minutes after making the fix, the error status has not changed.
Why is the error still appearing in the File System Log?
- A. System status messages are updated every 45 minutes
- B. System status messages are only available through CLI
- C. Corrected errors do not reappear in logs
- D. System status messages are updated hourly
Answer: D
NEW QUESTION # 39
An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves.
What consideration should be made when cabling the hardware?
- A. The DS60 shelf should be cabled on a separate chain
- B. The FS25 shelf must be fully populated
- C. The FS25 shelf should be cabled on a separate chain
- D. The DS60 shelf must be populated with identical drives
Answer: D
NEW QUESTION # 40
What is one advantage of using PowerProtect DD instead of backing up to other disk-based file systems?
- A. Only deduplicated data is sent across the network.
- B. Data can be restored to any client operating system.
- C. Data is stored locally on the client for fast restore.
- D. Only deduplicated blocks of data are needed for full recovery.
Answer: A
NEW QUESTION # 41
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD3300 Which compression algorithm will they see enabled by default
- A. Gz
- B. Gzfast
- C. LZW
- D. LZ
Answer: B
NEW QUESTION # 42
Which are supported compression algorithms in DDOS?
- A. rle, lzw, and lz
- B. lz, gz, and gzfast
- C. bmp, lz, and gz
- D. dsp, gz, and lz
Answer: B
NEW QUESTION # 43
......
EMC D-PDD-DY-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Ultimate D-PDD-DY-23 Guide to Prepare Free Latest EMC Practice Tests Dumps: https://pass4sure.practicedump.com/D-PDD-DY-23-exam-questions.html