Check the Available 300-620 Exam Dumps with 194 QA's UPDATED 2023
Download 300-620 Exam Dumps Questions to get 100% Success in Cisco
Cisco 300-620 exam is a valuable certification for IT professionals who wish to demonstrate their expertise in deploying and managing Cisco's ACI infrastructure. 300-620 exam covers a broad range of topics relating to ACI and is an essential prerequisite for CCNP Data Center certification. Through proper preparation and study, IT professionals can achieve success in 300-620 exam and gain recognition for their skills and knowledge in application-centric infrastructure.
NEW QUESTION # 11
Which protocol does ACI use to securely sane the configuration in a remote location?
- A. FTP
- B. TFTP
- C. HTTPS
- D. SCP
Answer: D
NEW QUESTION # 12
All workloads in VLAN 1001 have been migrated into EPG-1001. The requirement is to move the gateway address for VLAN 1001 from the core outside the Cisco ACI fabric into the Cisco ACI fabric. The endpoints in EPG-1001 must route traffic to endpoints in other EPGs and minimize flooded traffic in the fabric. Which configuration set is needed on the bridge domain to meet these requirements?
- A. Enable Flood
Enable Unicast Routing - B. Enable Hardware Proxy Enable Unicast Routing
- C. Disable Local IP Learning Limit Disable Unicast Routing
- D. Disable ARP Flood
Disable Limn Endpoint Learning
Answer: B
NEW QUESTION # 13
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.
Answer:
Explanation:
NEW QUESTION # 14
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 15
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.
Answer:
Explanation:
NEW QUESTION # 16
Refer to the exhibit.
Which two objects are created as a result of the configuration? (Choose two.)
- A. endpoint group
- B. VRF
- C. bridge domain
- D. attachable AEP
- E. application profile
Answer: B,C
NEW QUESTION # 17
Refer to the exhibit.
A Cisco ACI fabric is newly deployed, and the security team requires more visibility of all inter-EPG traffic flows. All traffic in a VRF must be forwarded to an existing firewall pair. During fallover, the standby firewall must continue to use the same IP and MAC as the primary firewall. Drag and drop the steps from the left Into the Implementation order on the right to configure the service graph that meets the requirements. (Not all steps are used.)
Answer:
Explanation:
NEW QUESTION # 18
A data center administrator is upgrading an ACI fabric. There are 3 APIC controllers in the fabric and all the servers are dual-homed to pairs of leaf switches configured in VPC mode. How should the fabric be upgraded to minimize possible traffic impact during the upgrade?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: D
NEW QUESTION # 19 
Refer to the exhibit. An engineer configures the Cisco ACI fabric for VMM integration with ESXi servers that are to be connected to the ACI leaves. The server team requires the network switches to initiate the LACP negotiation as opposed to the servers. The LAG group consists of two 10 Gigabit Ethernet links. The server learn also wants to evenly distribute traffic across all available links. Which two enhanced LAG policies meet these requirements? (Choose two.)
- A. LB Mode: Source and Destination MAC Address
- B. LB Mode: Destination IP Address and TCP/UDP Port
- C. LACP Mode: LACP Active
- D. LACP Mode: LACP Standby
- E. LB Mode: Source IP Address and TCP/UDP Port
Answer: A,C
Explanation:
Section: Integrations
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/aci_virtual_edge/configuration/2-x/Cisco-ACI- Virtual-Edge-Configuration-Guide-202/Cisco-ACI-Virtual-Edge-Configuration-Guide-202_chapter_0100.html
NEW QUESTION # 20
An engineer must limit management access to me Cisco ACI fabric that originates from a single subnet where the NOC operates. Access should be limited to SSH and HTTPS only. Where should the policy be configured on the Cisco APIC to meet the requirements?
- A. ACL on the console interface
- B. policy In the management tenant
- C. ACL on the management interface of the APIC
- D. policy on the management VLAN
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Oper
NEW QUESTION # 21 
Refer to the exhibit. An engineer is implementing Cisco ACI - VMware vCenter integration for a blade server that lacks support of bonding. Which port channel mode results in "route based on originating virtual port" on the VMware VDS?
- A. LACP Active
- B. MAC Pinning-Physical-NIC-load
- C. LACP Passive
- D. MAC Pinning+
- E. Static Channel - Mode On
Answer: D
Explanation:
Section: Integrations
NEW QUESTION # 22
An engineer must perform a Cisco ACI fabric upgrade that minimizes the impact on user traffic and allows only permitted users to perform an upgrade. Which two configuration steps should be taken to meet these requirements?
- A. Combine all switches into an upgrade group.
- B. Grant tenant-ext-admin access to a user who performs an upgrade
- C. Divide switches into two or more maintenance groups.
- D. Grant the fabric administrator role to a user who performs an upgrade.
- E. Divide Cisco APIC controllers into two or more maintenance groups.
Answer: C,D
NEW QUESTION # 23
An engineer must advertise a bridge domain subnet out of the ACI fabric to an OSPF neighbor. Which two configuration steps are required? (Choose two.)
- A. Configure Subnet scope to Advertised Externally
- B. Configure the Subnet under the EPG level.
- C. Add L50ut profile to the bridge domain using Associated L30uts section
- D. Add External Subnet for External EPG flag under External EPG.
- E. Create Route Control Profile with the export direction under External EPG.
Answer: A,C
NEW QUESTION # 24
What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)
- A. VLAN ID 4
- B. EIGRP routing
- C. BGP routing
- D. OSPF routing
- E. PIM ASM multicast routing
Answer: B,D
NEW QUESTION # 25
Which endpoint learning operation is completed on the egress leaf switch when traffic is received from an L3Out?
- A. The source IP address of the traffic is learned as a remote endpoint.
- B. The source MAC address of the traffic is learned as a remote endpoint.
- C. The source MAC and IP address of the traffic is learned as a local endpoint.
- D. No source MAC or IP address of the traffic is learned as a remote endpoint.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739989.html
NEW QUESTION # 26
What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)
- A. VLAN ID 4
- B. EIGRP routing
- C. BGP routing
- D. OSPF routing
- E. PIM ASM multicast routing
Answer: B,D
Explanation:
Section: ACI Anywhere
NEW QUESTION # 27
Which attribute should be configured for each user to enable RADIUS for external authentication in Cisco ACI?
- A. cisco-auth-features
- B. cisco-av-pair
- C. cisco-aci-role
- D. cisco-security domain
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/ b_Cisco_APIC_Security_Configuration_Guide/b_Cisco_APIC_Security_Guide_chapter_01011.html
NEW QUESTION # 28
Which two protocols support accessing backup files on a remote location from the APIC? (Choose two.)
- A. TFTP
- B. FTP
- C. HTTPS
- D. SFTP
- E. SMB
Answer: B,D
Explanation:
Section: ACI Management
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/troubleshooting/ b_APIC_Troubleshooting/b_APIC_Troubleshooting_appendix_010011.html
NEW QUESTION # 29
Which statement about ACI syslog is true?
- A. All syslog messages are sent to the destination through APIC.
- B. Notifications for different scopes of syslog objects can be sent only to one destination.
- C. Syslog messages are sent to the destination through the spine.
- D. Switches send syslog messages directly to the destinations.
Answer: B
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2016/pdf/BRKACI-2303.pdf
NEW QUESTION # 30
......
Best Value Available! 2023 Realistic Verified Free 300-620 Exam Questions: https://pass4sure.practicedump.com/300-620-exam-questions.html