Cisco 300-410 Dumps Questions [2022] Pass for 300-410 Exam
Updated Cisco Study Guide 300-410 Dumps Questions
Why You Need to Get Cisco 300-410 Certification?
One of the biggest reasons you should consider getting a Cisco certification is to work in a field that will still be thriving in 10 years. This means that there will always be jobs available for those who have the right skills and who work hard to keep up with the changes in this industry. Harder jobs that require higher levels of certification are usually more rewarding. Life will be easier when you have this certification. Accountant, Web developer, network administrator, and computer support technician are some of the common jobs for Cisco certified Networking professionals. Journey to the top by passing the 300-410 exam with help of Cisco 300-410 Dumps. Guides you to pass the 300-410 exam with a 100% guaranteed.
Change happens rapidly in today's high-tech world of computer technology. Products are being replaced almost every year, and an IT professional is expected to be on top of these changes. Covering the latest trends in the IT industry is critical, so an IT professional with Cisco 300-410 certification has an edge on competitors. Head start your career as a Cisco Certified Networking Professional. View the changes in the latest Cisco certification details by watching this video. Payment Method: PayPal, Creditcard, Debit card, Bank account.
NEW QUESTION 12
Refer to the exhibit.
After a new regional office is set up,not all guests can access the internet via guest Wi Fi. Clients are getting the correct IP address from guest Wi-Fi VLAN 364. which action resolves the issue ?
- A. Allow 10.66.46.0/23 in the inbound ACL
- B. Allow 10.66.46.0/23 in the outbound ACL
- C. Allow DNS traffic through the inbound ACL
- D. Allow DNS traffic through the outbound ACL
Answer: C
NEW QUESTION 13
Refer to the exhibit.
Which interface configuration must be configured on the spoke A router to enable a dynamic DMVPN tunnel with the spoke B router?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION 14
Refer to the exhibit.
The administrator successfully logs into R1 but cannot access privileged mode commands. What should be configured to resolve the issue?
- A. matching password on vty lines as cisco123!
- B. enable secret or enable password commands to enter into privileged mode
- C. aaa authorization reverse-access
- D. secret cisco123! at the end of the username command instead of password cisco123!
Answer: B
NEW QUESTION 15
Refer to the exhibit.
Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are uf SLA by defining frequency and schedulingsed
Answer:
Explanation:
NEW QUESTION 16
A company is expanding business by opening 35 branches over the Internet. A network engineer must configure DMVPN at the branch routers to connect with the hub router and allow NHRP to add spoke routers securely to the multicast NHRP mappings automatically Which configuration meets this requirement at the hub router?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
Explanation:
The command "ip nhrp map multicast dynamic" allows NHRP to automatically add spoke routers to the multicast NHRP mappings.
NEW QUESTION 17
What is the minimum time gap required by the local system before putting a BFD control packet on the wire?
- A. Desired Min TX Interval
- B. Required Min RX Interval
- C. Detect Mult
- D. Required Min Echo RX Interval
Answer: A
Explanation:
Explanation
Desired Min TX Interval: This is the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets, less any jitterapplied. The value zero is reserved.
Required Min Echo RX Interval: This is the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting, less anyjitter applied by the sender. If this value is zero, the transmitting system does not support the receipt of BFD Echo packets.
NEW QUESTION 18
A network administrator added a new spoke site with dynamic IP on the DMVPN network. Which configuration command passes traffic on the DMVPN tunnel from the spoke router?
- A. ip nhrp registration ignore
- B. ip nhrp registration no-unique
- C. ip nhrp registration dynamic
- D. ip nhrp registration no-registration
Answer: B
NEW QUESTION 19
Refer to the exhibit.
To provide reachability to network 10.1.1.0 /24 from R5, the network administrator redistributes EIGRP into OSPF on R3 but notices that R4 is now taking a ........... path through R5 to reach 10.1.1.0/24 network. Which action fixes the issue while keeping the reachability from R5 to 10.1.1.0/24 network?
- A. Redistribute OSPF into EIGRP on R4.
- B. Apply the outbound distribution list on R5 toward R4 in OSPF.
- C. Change the administrative distance of OSPF to 200 on R5.
- D. Change the administrative distance of the external EIGRP to 90.
Answer: D
NEW QUESTION 20
Refer to the exhibit.
Refer to the exhibit. An engineer configured user login based on authentication database on the router, but no one can log into the router. Which configuration resolves the issue?
- A. aaa authentication login default local
- B. aaa authentication login default enable
- C. aaa authorization network default local
- D. aaa authorization exec default local
Answer: A
NEW QUESTION 21
Refer to the exhibit.
A user has set up an IP SLA probe to test if a non-SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment. The probe is failing. Which action should the network administrator recommend for the probe to succeed?
- A. Modify the ip sla schedule frequency to forever.
- B. Add icmp-echo command for the host.
- C. Add the control disable option to the tcp connect.
- D. Re-issue the ip sla schedule command.
Answer: C
NEW QUESTION 22
Refer to the exhibit.
R6 should reach R1 via R5>R2>R1. Which action resolves the issue?
- A. Increase the cost to 61 between R2-R3-R1
- B. Increase the cost to 61 between R2 and R3
- C. Decrease the cost to 41 between R2 and R1
- D. Decrease the cost to 2 between R6-R5-R2
Answer: C
NEW QUESTION 23
Refer to the exhibit.
An IT staff member comes into the office during normal office hours and cannot access devices through SSH Which action should be taken to resolve this issue?
- A. Configure the access list in the outbound direction.
- B. Modify the access list to correct the subnet mask
- C. Configure the correct time range.
- D. Modify the access list to use the correct IP address.
Answer: D
Explanation:
Explanation
To ACL should be permit tcp 101
NEW QUESTION 24 
Refer to the exhibit. Why is user authentication being rejected?
- A. The TACACS+ server expects "user", but the NT client sends "domain/user".
- B. The TACACS+ server is down, and the user is not in the local database.
- C. The TACACS+ server is down, and the user is in the local database.
- D. The TACACS+ server refuses the user because the user is set up for CHAP.
Answer: B
Explanation:
Section: Infrastructure Security
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access- control-system-tacacs-/13864-tacacs-pppdebug.html
NEW QUESTION 25
What is a function of IPv6 ND inspection?
- A. It learns and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
- B. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables.
- C. It learns and secures bindings for stateless autoconfiguration addresses in Layer 2 neighbor tables
- D. It learns and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables.
Answer: C
NEW QUESTION 26
Exhibit:
BGP is flapping after the Copp policy is applied. What are the two solutions to fix the issue?
(Choose two)
- A. Configure a higher value for CIR under the default class to allow more packets during peak traffic
- B. Configure a higher value for CIR under the class COPP-CRITICAL-7600
- C. Configure IP CEF to CoPP policy and BGP to work
- D. Configure a three-color policer instead of two-color policer under class COPP-CRITICAL-
7600 - E. Configure BGP in the COPP-CRITICAL-7600 ACL
Answer: A,E
Explanation:
Explanation
The policy-map COPP-7600 only rate-limit HTTP & HTTPS traffic (based on the ACL conditions) so any BGP packets will be processed in the class "class-default", which drops exceeded BGP packets. Therefore we have two ways to solve this problem:
+ Add BGP to the ACL with the statement "permit tcp any any eq bgp"
+ Configure higher value for CIR in default class as 2Mbps is too low for web traffic (http &
https)
NEW QUESTION 27
Refer to the exhibit.
When the FastEthemet0/1 goes down, the route to 172.29.0 0/16 via 192.168.253 2 is not installed in the RIB. Which action resolves the issue?
- A. Configure feasible distance greater than the reported distance
- B. Configure feasible distance greater than the successor's feasible distance.
- C. Configure reported distance greater than the successor's feasible distance.
- D. Configure reported distance greater than the feasible distance
Answer: A
NEW QUESTION 28
What does the PE router convert the Ipv4 prefix to within an MPLS VPN?
- A. VPN-IPv4 prefix combined with the 64-bit route distinguisher
- B. 48-bit route combining the IP and PE router-id
- C. prefix that combines the ASN, PE router-id, and IP prefix
- D. eBGP path association between the PE and CE sessions
Answer: A
Explanation:
NEW QUESTION 29
......
Achieve Success in Actual 300-410 Exam 300-410 Exam Dumps: https://pass4sure.practicedump.com/300-410-exam-questions.html