[Jan 20, 2026] 350-501 Exam Dumps - Try Best 350-501 Exam Questions - PracticeDump
Verified 350-501 exam dumps Q&As with Correct 590 Questions and Answers
By passing the Cisco 350-501 exam, candidates can demonstrate their proficiency in implementing and operating service provider network technologies. Implementing and Operating Cisco Service Provider Network Core Technologies certification can help them advance their careers in the service provider industry and gain recognition for their skills and knowledge. Additionally, it can open up new job opportunities and lead to higher salaries.
Difficulty in Writing Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
The Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct materials for their tests.
The Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies test is not simpler and unless well prepared, can prove to be a very tough exam. If competent 350-501 exam dumps are researched and evaluated on 350-501 practice exams, the exam difficulty can be overcome.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. PracticeDump have the most up to date 350-501 exam dumps pdf that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track PracticeDump for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
NEW QUESTION # 289
Refer to the exhibit. Router 1 and router 2 are running BGP. and router 2 and router 3 are running OSPF Area 0. Router 1 is advertising loopback interlaces Lo 0 and lo 2. and router 2 is redistributing BGP into OSPF Area 0.
Which configuration must an administrator apply so that router 2 uses a route map to redistribute only the internal route from Lo 2?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 290
Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 291 
Refer to the exhibit. An engineer working for a private telecommunication company with an employee id:
3414:81:713 is implementing this network, in which:
Routers R1A and R1B are eBGP neighbors.
iBGP is configured within AS 65515 and AS 65516.
Network 192.168.2.0/24 is shared with AS 65516.
Router R3A has an iBGP relationship with router R2A only.
Router R2A has an iBGP relationship with routers R1A and R3A.
Which additional task must the engineer perform to complete the configuration?
- A. Configure router R2A as a route reflector to advertise the iBGP learned prefix from router R3A to R1A.
- B. Configure router R3A to redistribute route 192.168.2.0/24 into the configured IGP to advertise the prefix to router R1A.
- C. Configure router R1A with a static route to 192.168.2.0/24 that is redistributed into BGP.
- D. Configure router R2A to use the next-hop-self attribute when advertising the learned route to router R1A.
Answer: A
NEW QUESTION # 292
Drag and drop the functions from the path computation element protocol roles on the right.
Answer:
Explanation:
NEW QUESTION # 293
Refer to the exhibit:
Which three outcomes occur if the prefix list is added to the neighbor? (Choose three)
- A. 192.168 0.0/17 is denied.
- B. 192.168 0.0/19 is permitted
- C. 192.168 0.0/16 is permitted
- D. 192.168.0.0/16 is denied
- E. 192.168 0.0/19 is denied.
- F. 192.168 0.0/17 is permitted
Answer: B,D,F
NEW QUESTION # 294
Refer to the exhibit:
With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?
- A. 192.168.0.5
- B. 192.168.0.3
- C. 192.168.0.4
- D. 192.168.0.1
Answer: B
NEW QUESTION # 295
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 296
Drag and drop the descriptions from the left onto the corresponding OS types on the right.
IOS XE:
It uses linux-based kernel
It has a separate control plane
IOS:
It is monolithic
It shares memory space
Answer:
Explanation:
NEW QUESTION # 297
Refer to the exhibit:
What is the effect of this configuration?
- A. The two routers fail to form a neighbor relationship because the authentication configuration is missing
- B. The two routers fail to form a neighbor relationship because they have different ISIS area types.
- C. The two routers successfully form a neighbor relationship
- D. The two routers fail to form a neighbor relationship because their system IDs are different.
Answer: C
Explanation:
In ISIS, routers can form neighbor relationships even with different system IDs, provided they are configured to be in the same area and the authentication between them is correctly set up.
NEW QUESTION # 298
An engineer working for a telecommunication company with an employee ID: 4460:35:466 must configure an OSPF router in a multivendor network so that it performs NSF in the event of a route processor switchover. Which configuration must the engineer apply?
- A. router ospf 1 nsf ietf helper
- B. router ospf 1 nsf ietf
- C. router ospf 1 nsf Cisco
- D. router ospf 1 nsf Cisco helper
Answer: B
Explanation:
In a multivendor network environment, it is essential to configure OSPF NSF with the IETF standard to ensure compatibility across different vendor devices. The command router ospf 1 nsf ietf enables OSPF NSF capability using the IETF standard, which facilitates uninterrupted forwarding during a route processor switchover.
NEW QUESTION # 299
Refer to the exhibit.
Refer for the exhibit. To optimize network operations, the senior architect created this Python 3.9 script for network automation tasks and to leverage Ansible 4.0 playbooks. Devices In the network support only RFC 2617-based authentication What does the script do?
- A. The script leverages REST API calls and configures Interface GlgabilEthemet0/1 with IP address 10.1.131.112/30.
- B. The script parses the JSON response from the router at IP address 172 168.211.65 and checks If the interface GigaWtEthernet0/1 with IP address 10.1.131.112 exists on the router.
- C. The script logs in via SSH and configures interface GigabitEthernetO/1 with IP address 10.1.131.112/30.
- D. The script performs a configuration sanity check on the device with IP address 172.168.211.65 via HTTP and returns an alert If the payload field falls to match.
Answer: B
NEW QUESTION # 300
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- B. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
- C. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- D. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
Answer: A
NEW QUESTION # 301
Drag and drop the functionalities from the left onto the target fields on the right.
Answer:
Explanation:
NEW QUESTION # 302
A network administrator is planning a new network with a segment-routing architecture using a distributed control plane. How is routing information distributed on such a network?
- A. Each segment is signaled by an SR controller, but each segment makes its own steering decisions based on SR policy.
- B. Each segment is signaled by a compatible routing protocol, and each segment makes its own steering decisions based on SR policy.
- C. Each segment is signaled by an SR controller that makes the steering decisions for each node.
- D. Each segment is signaled by MPLS, and each segment makes steering decisions based on the routing policy pushed by BGP.
Answer: C
NEW QUESTION # 303
Refer to the exhibit:
- A. 192.168.0.4
- B. 192.168.0.5
- C. 192.168.0.1
- D. 192.168.0.3
Answer: B
NEW QUESTION # 304
Refer to the exhibit.
Refer to the exhibit. Four midsize service providers provide access to different customers that use Layer 3 VPN services to enable communication across geographic regions. The service providers are connected as shown in the exhibit, and the PEs have established eBGP relationships. PE4 has an IBGP relationship with PE5. The routes that PE4 learns from PE5 must reach the other PE routers, but they are absent from the routing tables on the other PES. Which action should the engineers take to correct the problem?
- A. Advertise the route targets for PE5 to the other PEs
- B. Configure a peering between all five Pes.
- C. Enable BOP IPv4 unicast on PE4 and PE5
- D. Disable BGP synchronization on PE4.
Answer: B
NEW QUESTION # 305
Refer to the exhibit. An administrator working for large ISP must connect its two POP sites to provide internet connectivity to its customers. Which configuration must the administrator perform to establish an iBGP session between routers PE1 on POP site 1 and PE2 on POP site 2?
- A. PE1#configure terminal
PE1(config)#router bgp 65111
PE1(config-router)#no neighbor 172.19.10.10 shutdown
PE1(config-router)#end - B. PE1#configure terminal
PE1(config)#router bgp 65111
PE1(config-router)#address-family ipv4 unicast
PE1(config-router-af)#neighbor 172.19.10.10 activate
PE1(config-router-af)#end - C. PE2#configure terminal
PE2(config)#router bgp 65111
PE2(config-router)#address-family ipv4 unicast
PE2(config-router-af)#neighbor 172.18.10.1 activate
PE2(config-router-af)#end - D. PE2#configure terminal
PE2(config)#router bgp 65111
PE2(config-router)#no neighbor 172.18.10.1 shutdown
PE2(config-router)#end
Answer: A
NEW QUESTION # 306
......
Cisco 350-501 Test Engine PDF - All Free Dumps: https://pass4sure.practicedump.com/350-501-exam-questions.html