[Oct-2022] Exam 300-615 New Brain Dump Professional - PracticeDump [Q66-Q81]

[Oct-2022] Exam 300-615: New Brain Dump Professional - PracticeDump

Free 300-615 Exam Dumps to Improve Exam Score

NEW QUESTION 66
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.

Answer:

Explanation:

NEW QUESTION 67
Refer to the exhibit.

The HSRP instance on both switches is showing as active. Which action resolves the issue?

A. Configure the HSRP timers to be the same.
B. Allow VLAN 100 between the switches.
C. Configure preempt on only one of the switches.
D. Configure the IP address of N9K-B on the same subnet as N9K-A.

Answer: B

NEW QUESTION 68
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.

Answer:

Explanation:

NEW QUESTION 69
Refer to the exhibit.

The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?

A. event statement
B. IP address of the SNMP server
C. event-default action statement
D. policy-default action statement

Answer: B

NEW QUESTION 70
Drag and drop the commands from the left onto the correct categories on the right.

Answer:

Explanation:

NEW QUESTION 71
Refer to the exhibit.

A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?

A. Manually configure NTP in the Guest shell.
B. Update the Python packages on the Cisco Nexus switch directly.
C. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
D. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.

Answer: C

NEW QUESTION 72
Refer to the exhibit.

A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?

A. event syslog occurs 10
B. event policy-default count 1 time 100
C. event cli match 'configure terminal'
D. action 2.0 event-default

Answer: D

NEW QUESTION 73
Refer to the exhibit.

An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?

A. Configure each uplink to be a member of a separate LACP port channel.
B. Configure source-destination load balancing on N5K-Core-1.
C. Configure the pinning max-link as 2.
D. Configure destination-mac load balancing on N5K-Core-1

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/n5k/commands/pinning-max-links.html

NEW QUESTION 74
A system administrator connects a Cisco Nexus 2248PQ FEX to a fabric interconnect to expand the ports that are available for connecting Cisco UCS C-Series Rack Servers. In Cisco UCS Manager, the administrator does not see the servers connected to this FEX. Which action should be taken to resolve the issue?

A. The fabric interconnects must be rebooted before the FEX is recognized
B. The ports that connect the FEX to the fabric interconnects must be configured as server ports
C. The transceivers must be exchanged to support the connectivity between the FEX and the fabric interconnects
D. The FEX must be exchanged so that it supports the connectivity between fabric interconnects and UCS CSeries servers

Answer: B

NEW QUESTION 75
Refer to the exhibit.

An engineer configures the server port on a Cisco Nexus 5000 Series Switch. The switch connects to an NPV edge switch port. The server fails to send the FC traffic to the fabric. Which action resolves the issue?

A. Enable the NPIV mode on the Cisco Nexus 5000 switch.
B. Replace the SFP in slot fc2/12.
C. Configure the BB_credit buffer on the uplink port.
D. Match the VSAN membership on both ends of the connection.

Answer: D

NEW QUESTION 76
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?

A. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are available
3- Connect the power cord and power on the server
B. 1- Disconnect the power cord
2- Confirm that all cards are properly seated
3- Connect the power cord
C. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server
D. 1- Disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pdf

NEW QUESTION 77
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?

A. The same Fabric Name value should be used before after wiping all devices.
B. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
C. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
D. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.

Answer: D

Explanation:
Section: Compute Platforms

NEW QUESTION 78
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.

Answer:

Explanation:

NEW QUESTION 79
Refer to the exhibit. A network engineer deploys scripts to the guest shell of a Cisco Nexus switch. The scripts fail to operate properly due to the limited CPU and file system resources that are assigned by default to the guest shell. The engineer allocated more memory and disk space to the guest shell, but the application continues to fail. Which action resolves the issue?