Updated Oct-2024 Exam Engine or PDF for the 1z0-1075-24 Tests Free Updated Today!
Ultimate Guide to Prepare 1z0-1075-24 with Accurate PDF Questions
NEW QUESTION # 12
In which two places can you create and edit user-defined work order statuses?
- A. Functional Setup Manager > Setup: Manufacturing and Supply Chain Materials Management
- B. Work Definition work area tasks
- C. Scheduled Processes
- D. Work Execution work area tasks
Answer: A,D
Explanation:
User-defined work order statuses can be created and edited in the following areas of Oracle Manufacturing Cloud:
Functional Setup Manager: This is where the configuration of user-defined work order statuses is performed under the "Manufacturing and Supply Chain Materials Management" setup. Users can define new statuses and configure their behavior.
Work Execution work area tasks: Users can also manage work order statuses directly in the Work Execution area, which is part of the day-to-day management of production orders.
Incorrect options:
Scheduled Processes (A) and Work Definition work area tasks (B) are not areas where work order statuses are defined or edited.
NEW QUESTION # 13
A Production Operator is reporting an orderless transaction and realizes that the item has to be scrapped because some specifications were not met during one of the operations of the item. While performing orderless transactions, the operator notices that the Scrap and Return from Scrap transaction types are not available to transact.
Which privilege does the operator need to have to use these two transaction types?
- A. Return from Scrap Transactions
- B. Print Work Order Traveler
- C. Report Material Transactions
- D. Report Scrap Transactions.
Answer: D
Explanation:
In Oracle Manufacturing Cloud, for a Production Operator to perform scrap and return from scrap transactions during an orderless transaction, they must have the Report Scrap Transactions privilege. This allows them to properly record and reverse scrap transactions for any items that fail to meet specifications.
Report Scrap Transactions grants the operator the necessary permissions to use both the Scrap and Return from Scrap transaction types. Without this privilege, these transaction types will not be available in the system.
Incorrect options:
Return from Scrap Transactions (B) is not the correct privilege; the privilege to both scrap and return from scrap is covered under Report Scrap Transactions.
Print Work Order Traveler (C) and Report Material Transactions (D) are unrelated to scrap transaction reporting.
NEW QUESTION # 14
A Production Operator needs to load work order operation transactions from an external system into Manufacturing Cloud.
What is the correct sequence of tasks to achieve this?
- A. Load data to data repository > Export file to UCM server > Load file from UCM to interface table > Process import operations transactions.
- B. Export file to UCM server > Load data to data repository > Process import operations transactions > Load file from UCM to interface table.
- C. Load data to data repository > Load file from UCM to interface table > Export file to UCM server > Process import operations transactions.
- D. Load data to data repository > Export file to UCM server > Process import operations transactions > Load file from UCM to Interface table.
Answer: A
Explanation:
When loading work order operation transactions from an external system into Oracle Manufacturing Cloud, the correct sequence of tasks is:
Load data to the data repository: This step ensures the external data is available in Oracle Manufacturing Cloud.
Export file to UCM server: The data file is then exported to the Universal Content Management (UCM) server, which acts as a staging area for further processing.
Load file from UCM to interface table: The data from the UCM server is loaded into the appropriate interface table.
Process import operations transactions: Finally, the system processes the imported transactions and updates the work orders accordingly.
Incorrect sequences:
Options A, B, C do not follow the correct order, particularly around the interaction between the UCM server and the interface tables.
NEW QUESTION # 15
Your client needs to implement operational checks for compliance with training and job requirements. Which four statements are true about this functionality?
- A. The qualification Is used to warn a production supervisor If they assign operators that don't meet the skill requirements against the resource.
- B. You have the ability to associate a Job profile with a Work definition operation resource.
- C. A qualified operator need not be specified to report resource transactions.
- D. You do not have the ability to associate a Job profile with a Work order operation resource.
- E. The qualification Is enforced during reporting of labor usage.
- F. You have the ability to associate a Job profile with a Standard operation resource.
Answer: A,B,E,F
Explanation:
Oracle Manufacturing Cloud provides functionality to enforce compliance with training and job requirements through operational checks. The correct statements are:
Statement B: You can associate a job profile with a work definition operation resource. This ensures that only operators who meet the job requirements are allowed to perform the work.
Statement C: Qualifications are enforced when reporting labor usage, meaning that if an operator lacks the required qualifications, the system can prevent or warn about the labor transaction.
Statement D: You can also associate a job profile with a standard operation resource to enforce skills and training compliance.
Statement F: If an unqualified operator is assigned to a task, the system can notify the production supervisor to avoid non-compliance with skill requirements.
Incorrect options:
Statement A: A qualified operator must be specified to report resource transactions.
Statement E: You can associate a job profile with a work order operation resource, contrary to what is implied.
NEW QUESTION # 16
Which three types of item quantities are displayed on the Work Order History tab?
- A. Remaining
- B. Scrapped
- C. In Process
- D. Total
- E. Completed
Answer: B,C,E
Explanation:
The Work Order History tab in Oracle Manufacturing Cloud provides a summary of different item quantities related to the lifecycle of a work order. The following quantities are displayed:
In Process: This shows the quantity of items currently being processed in the production cycle.
Scrapped: This quantity reflects the number of items that have been discarded due to defects or other issues during the production process.
Completed: This quantity shows the number of items that have successfully been completed in the work order.
Incorrect options:
Remaining: The system does not specifically display a "Remaining" quantity on the Work Order History tab.
Total: The total quantity is not shown as a standalone metric in the Work Order History tab but is implied by other metrics.
NEW QUESTION # 17
Which statement is NOT true about using a Quick Complete action for an operation transaction?
- A. You can use It to transact one or more serial numbers.
- B. You can use it to collect Inspection results.
- C. It is used on serial tracked operations and non-serial tracked operations with or without inspections.
- D. You can use it for simultaneous reporting of one or more transactions.
- E. You can use it to transact only one serial number at a time.
Answer: E
Explanation:
The Quick Complete action allows for fast, simplified transaction processing for work orders and operations. The statement that is not true is:
Statement E is incorrect because Quick Complete can be used to transact multiple serial numbers at a time, not just one. This feature is designed to handle both serial-tracked and non-serial-tracked operations efficiently.
Correct statements:
Statement A: Quick Complete supports simultaneous reporting of multiple transactions, allowing for streamlined processing.
Statement B: It can be used for both serial-tracked and non-serial-tracked operations, whether or not inspections are involved.
Statement C: Multiple serial numbers can be transacted at once using this feature.
Statement D: While Quick Complete can handle inspection-related transactions, it is not specifically for collecting inspection results.
NEW QUESTION # 18
Which statement is NOT true about the Reservations tab?
- A. You can view the reservation details of a work order as a source of demand, and a sales order as supply.
- B. Manual reservations can be done for a work order in inventory.
- C. Demand details displayed are: Document Type (such as Sales Order), Customer Number and Name, Document Number, Due Date, and Quantity.
- D. Reservations are generally created when a Back-to-Back sales order or a Configured Items sales order Is reserved for the work order.
- E. A work order can be reserved against one or more sales orders.
Answer: A
Explanation:
In Oracle Manufacturing Cloud, the Reservations tab provides detailed information on reservations linked to work orders and sales orders. The following explains why statement E is not true:
Statement E is incorrect: A work order is typically viewed as a source of supply, not demand. Sales orders generate demand, while work orders are created to supply the required products. Therefore, reservation details will show the work order as a source of supply and the sales order as the source of demand.
Correct statements:
Statement A: Demand details such as document type (e.g., Sales Order), customer number, document number, due date, and quantity are displayed.
Statement B: Reservations are often created for Back-to-Back or Configured Items sales orders to ensure the necessary products are reserved in the system for production.
Statement C: A work order can be reserved against one or more sales orders, especially in cases of configurable or customized items.
Statement D: Manual reservations for a work order can be made directly in inventory to allocate the necessary materials for production.
NEW QUESTION # 19
Which three can you set as Overcompletion Tolerance Type and its value for a subcomponent yield, so that the job order can report the excess production completion?
- A. Overcompletion Tolerance Type = Percentage; value = 100
- B. Overcompletion Tolerance Type = Percentage; value = 0
- C. Overcompletion Tolerance Type = Amount; value > 0
- D. Overcompletion Tolerance Type = Percentage; value > 0
- E. Overcompletion Tolerance Type = Amount; value = 0
Answer: A,C,D
Explanation:
In Oracle Manufacturing Cloud, overcompletion tolerance allows for the reporting of excess production completion beyond the planned amount. The overcompletion tolerance type and value determine how much extra production can be reported:
Percentage, value = 100 allows the system to accept overcompletion of up to 100% more than the planned quantity.
Amount, value > 0 specifies a fixed amount by which overproduction can be tolerated.
Percentage, value > 0 allows overproduction by a percentage greater than 0 but less than 100.
Incorrect settings:
A: Setting the percentage to 0 means no overcompletion is allowed.
C: An amount of 0 also means no excess production can be reported.
NEW QUESTION # 20
Which three statements are true about managing Units of Measure?
- A. A unit of measure standard conversion specifies the conversion factor by which the unit of measure is equivalent to the unit of measure class.
- B. Conversions between classes are unique for each item; the conversion rate varies for intraclass units of measure.
- C. If you want to transact items in units of measure that belong to classes other than their primary UOM class, you must define conversions between the base units of measure in different UOM classes.
- D. A unit of measure conversion is a mathematical relationship between two different units of measure.
- E. You must define the unit of measure class with a base unit of measure.
Answer: C,D,E
Explanation:
In Oracle Manufacturing Cloud, managing Units of Measure (UOM) is critical to ensuring that transactions, measurements, and conversions are handled accurately. Below is a detailed explanation of the correct statements:
Statement A: You must define the unit of measure class with a base unit of measure - This is a fundamental setup in Oracle Manufacturing Cloud. Every UOM class must have a base unit of measure defined because it serves as the reference for all conversions within the class. The base UOM acts as a standard, and all other UOMs within the class are defined relative to it.
Reference:
Statement B: If you want to transact items in units of measure that belong to classes other than their primary UOM class, you must define conversions between the base units of measure in different UOM classes - This is true. If an item's UOM belongs to one class, but you need to transact in another UOM from a different class, a conversion must be defined between the base UOMs of the two classes. This ensures seamless inter-class transactions and measurement consistency.
Statement E: A unit of measure conversion is a mathematical relationship between two different units of measure - UOM conversions in Oracle Cloud are defined mathematically, typically by specifying a conversion factor. This relationship is used by the system to automatically convert quantities between different units of measure, whether for inter-class or intra-class conversions.
Incorrect Statements:
Statement C: A unit of measure standard conversion specifies the conversion factor by which the unit of measure is equivalent to the unit of measure class - This statement is incorrect because a standard conversion relates two UOMs directly, not between a UOM and the class itself. Conversions operate between specific UOMs, not between a UOM and its class.
Statement D: Conversions between classes are unique for each item; the conversion rate varies for intraclass units of measure - This is not accurate because conversions between UOM classes are not unique for each item. Once a UOM conversion is established between classes, it applies globally unless there are specific item-level conversions.
This ensures a consistent approach to defining, transacting, and converting units of measure across different manufacturing and inventory processes within Oracle Manufacturing Cloud.
NEW QUESTION # 21
During a Manufacturing Cloud implementation, a Production Supervisor wants to close the work orders for the previous month and make sure that they include the correct cost.
What must they do to achieve this?
- A. Make sure that all costs are Included while closing last month's work orders; however, variances can be Included after closing the work orders.
- B. Include all costs and variances in last month's work orders and close them; however, the work orders where updates are expected must not be closed.
- C. Update work order costs at any time; they can be updated regardless of the status of the work order
- D. Exclude cost variances while closing last month's work orders because those can be applied directly In Subledger Accounting.
Answer: B
Explanation:
To ensure that work orders for the previous month are closed with the correct costs, the Production Supervisor must:
Include all costs and variances in the work orders before closing them. This ensures that the work orders reflect the true cost of production, including any deviations from the expected costs. However, if there are work orders that are still in progress or expected to receive updates (such as material or labor transactions), those work orders should not be closed until all costs are finalized.
Incorrect options:
A: Excluding cost variances would result in inaccurate costing.
B: All costs, including variances, must be included before closing.
D: Costs cannot be updated after the work order is closed, so all updates must occur before closing the work order.
NEW QUESTION # 22
Your customer runs production 24 x 7 x 365 and wants to track Overall Equipment Effectiveness (OEE) online.
Which key setup can they use to achieve this?
- A. Enable IoT Production Monitoring and turn on "Enable synchronization to IoT Production Monitoring" In Inventory Organization.
- B. Enable IoT Fleet Monitoring and enable synchronization to IoT Production Monitoring in Plant Parameters.
- C. Enable IoT Asset Monitoring and turn on "Enable synchronization to IoT Asset Monitoring" in Resources.
- D. Enable IoT Asset Monitoring and turn on "Enable synchronization to IoT Asset Monitoring" In Plant Parameters.
- E. Enable IoT Production Monitoring and turn on "Enable synchronization to IoT Production
Answer: A
Explanation:
To track Overall Equipment Effectiveness (OEE) in real-time, Oracle Manufacturing Cloud can integrate with IoT solutions. The correct setup involves:
Enabling IoT Production Monitoring and turning on synchronization to IoT Production Monitoring in the Inventory Organization. This allows real-time data from the shop floor to be captured, processed, and used to monitor equipment effectiveness, performance, and availability.
Incorrect options:
IoT Fleet Monitoring (A) and IoT Asset Monitoring (B, D) focus on tracking assets and fleets, which are more relevant for logistics or asset management, not production monitoring for OEE.
NEW QUESTION # 23
Your customer has multiple distribution centers and a few manufacturing plants. The plants manufacture different items with some overlap between them. The distribution centers stock parts from all plants.
A Corporate Engineering team is responsible for centrally defining items and catalogs. This team defines the items and sets the attributes for most parameters. The respective distribution centers and manufacturing plants must be allowed to change some attributes locally.
What is the best way to achieve this?
- A. Set up plants and the Corporate Engineering organization as Inventory organizations, and distribution centers as item organizations.
- B. Set up plants and distribution centers as inventory organizations, and the Corporate Engineering organization as an Item organization.
- C. Set up plants and the Corporate Engineering organization as item organizations, and distribution centers as inventory organizations.
- D. Set up plants, distribution centers, and the Corporate Engineering organization as inventory organizations.
- E. Set up plants as inventory organizations, and distribution centers and the corporate Engineering organization as item organizations.
Answer: B
Explanation:
In Oracle Cloud, managing items and their attributes across multiple organizations requires careful structuring of inventory and item organizations. The best way to configure this setup given the customer's requirements is as follows:
Plants and Distribution Centers as Inventory Organizations: Inventory organizations are required to manage on-hand quantities, perform transactions, and handle the physical movement of materials. Plants need to be inventory organizations to manage production, and distribution centers need to be inventory organizations to manage stocking and distribution.
Corporate Engineering Organization as an Item Organization: An item organization is responsible for centrally defining item attributes. By setting the Corporate Engineering team as an item organization, you ensure that item definitions are controlled centrally. The team can define standard attributes while allowing inventory organizations (plants and distribution centers) to modify certain attributes at their level based on local needs.
This structure allows for centralized item management with localized flexibility for plants and distribution centers.
Reference:
Incorrect Options:
A: Defining all entities as inventory organizations would not allow centralized control of item attributes.
C, D, E: These setups would either limit the ability to control item attributes centrally or misassign organizations that need to handle physical inventory as item-only organizations.
NEW QUESTION # 24
Your client informs you that after running the "Process Item Structure Changes to Work Definitions" scheduled process, they received a workflow notification.
Which statement is NOT a workflow notification that you might get if automation is not performed?
- A. The replacement component has been assigned as an ad hoc Item to the same operation as the original component.
- B. The original component has been assigned to more than one work definition operation.
- C. The manufacturing plant Is enabled for ERES, the work definition changes are not expected to go through an approval process.
- D. The original component is not assigned to any work definition operation.
Answer: C
Explanation:
After running the "Process Item Structure Changes to Work Definitions" scheduled process, a series of workflow notifications may be triggered if the automation is not performed properly. The following notifications can be expected in scenarios where manual intervention is needed:
Statement B is incorrect because, in Oracle Manufacturing Cloud, if the manufacturing plant is enabled for ERES (Engineering Release Execution System), it generally implies that any changes in work definitions would still require an approval process for validation and control. The fact that ERES is enabled would not automatically bypass the approval process.
Correct Notifications:
Statement A: You may receive a notification that a replacement component has been assigned as an ad hoc item to the same operation where the original component was assigned.
Statement C: A notification may alert you that the original component is not assigned to any work definition operation, signaling a potential issue that requires manual intervention.
Statement D: It is also possible to receive a notification indicating that the original component has been assigned to more than one work definition operation, which may require review or adjustment.
NEW QUESTION # 25
A Plant Manager bought several machines for their ABC manufacturing plant. The plant is set up with a separate cost element set, ABC, in Manufacturing Cloud.
How must the Plant Manager configure these machines so that they are costed to the work order for which operations are performed on them?
- A. Set up the machines with a cost element type of "Resource" by selecting Cost Element Set ABC.
- B. Set up the machines with a cost element type of "Overhead" by selecting Cost Element Set ABC.
- C. Set up the machines with a cost element type of "Overhead" by selecting Cost Element Set Common.
- D. Set up the machines with a cost element type of "Resource" by selecting Cost Element Set Common.
Answer: A
Explanation:
When configuring machines that will be used in production operations and will incur costs associated with work orders, the correct setup for these machines involves:
Setting up the machines as a "Resource" in the cost element set ABC: This allows the machines to be directly associated with the work orders for which they are used, ensuring that their costs are appropriately tracked and charged to the work order. Resources include equipment, labor, and other direct costs involved in production.
Incorrect options:
"Overhead" (B, D): Overhead costs typically represent indirect costs, not the direct usage of machines in production.
Cost Element Set Common (A): Since the plant uses a separate cost element set (ABC), the machines must be assigned to this specific set, not the Common cost element set.
NEW QUESTION # 26
Which three are Cost accounting methods'
- A. Layer Cost, also known as "LIFO"
- B. Frozen Standard Cost
- C. Periodic Actual Cost
- D. Perpetual Average Cost
- E. Actual Cost, also known as "FIFO"
Answer: B,D,E
Explanation:
Oracle Manufacturing Cloud supports multiple cost accounting methods to help organizations track the cost of their goods and inventory effectively. Below is an explanation of the correct answers:
Statement A: Perpetual Average Cost - This is a commonly used method in Oracle Cloud where the system continuously updates the average cost of an item with each receipt or transaction. This method is useful for organizations that need to track the moving average cost of goods in real-time.
Reference:
Statement C: Frozen Standard Cost - This method involves predefining a standard cost for each item at the beginning of a financial period. The cost remains "frozen" throughout the period, and variances between the actual cost and the standard cost are tracked and analyzed separately.
Statement D: Actual Cost, also known as "FIFO" - The FIFO (First In, First Out) method records costs based on the order in which items are received. It is a type of actual costing where items are valued based on the specific costs of the earliest received inventory. Oracle Cloud supports FIFO as part of its actual costing methods.
Incorrect Statements:
Statement B: Layer Cost, also known as "LIFO" - Oracle Cloud does not natively support LIFO (Last In, First Out) as a cost method due to accounting and regulatory restrictions in various regions. LIFO is generally not used in the system as a standard method.
Statement E: Periodic Actual Cost - While there is a method called Periodic Average Cost, Periodic Actual Cost is not typically listed as a standard costing method in Oracle Cloud.
NEW QUESTION # 27
An employee is responsible for dealing with different manufacturing practices and processes, machines, tools, and equipment that turn raw material into a product.
Which seeded job role must you assign to this employee?
- A. Manufacturing Supervisor
- B. Production Supervisor
- C. Production Engineer
- D. Production Operator
- E. Manufacturing Engineer
Answer: E
Explanation:
In Oracle Manufacturing Cloud, the Manufacturing Engineer role is responsible for dealing with various manufacturing practices, processes, machines, tools, and equipment that transform raw materials into finished products. This role focuses on defining and managing production processes, resources, and operations in manufacturing plants.
Manufacturing Engineer: This role involves creating and maintaining manufacturing processes, production resources, and work instructions. It ensures that products are manufactured efficiently and in compliance with quality standards.
NEW QUESTION # 28
You are defining a standard operation for visual inspection. You want the completion of this standard operation to be reported in all work orders that reference it.
Which setup task must you perform to achieve this?
- A. Deselect the Count Point check box while defining the standard operation.
- B. Ensure that the Charge Type of the resource is Automatic.
- C. Select the Automatically Transact check box while defining the standard operation.
- D. Select the Count Point check box while defining the standard operation.
Answer: D
Explanation:
In Oracle Manufacturing Cloud, when defining a standard operation such as visual inspection, marking it as a Count Point ensures that its completion will be tracked and reported for all work orders referencing it. A Count Point operation is one where progress must be explicitly recorded, allowing visibility into work order completion.
Selecting the Count Point check box ensures that this operation becomes a mandatory checkpoint where users must report completion in all related work orders. This is essential for operations like visual inspection, where reporting completion is critical to production quality.
NEW QUESTION # 29
You have been asked to set up cost estimates for 10 different purchased items. Which two tasks can you perform to achieve this?
- A. Use the Mass Edit functionality.
- B. Import a spreadsheet.
- C. Call a web service.
- D. Enter cost estimates directly into the UI.
- E. Run the "Update Item Cost Estimate" ESS process.
Answer: B,D
Explanation:
To set up cost estimates for multiple purchased items in Oracle Manufacturing Cloud, the following tasks can be performed:
Import a spreadsheet (A): You can import cost estimates for multiple items at once using a preformatted spreadsheet, which allows for efficient data entry.
Enter cost estimates directly into the UI (E): Cost estimates can also be manually entered directly through the user interface for individual items, providing flexibility when fewer items need to be updated.
Incorrect options:
Calling a web service (B) is not the correct method for setting up cost estimates.
Mass Edit functionality (C) and Update Item Cost Estimate process (D) do not directly apply to entering new cost estimates for purchased items.
NEW QUESTION # 30
......
Pass Oracle With PracticeDump Exam Dumps: https://pass4sure.practicedump.com/1z0-1075-24-exam-questions.html