PracticeDump NS0-184 Real Exam Question Answers Updated [Aug 10, 2022]
Easily To Pass New Network Appliance NS0-184 Dumps with 60 Questions
Click on the link below to get more info
Official link to the NS0-184 Exam
NEW QUESTION 23
On which type of network interfaces are the cluster interconnect LIFs created?
- A. on an interface group
- B. on a UTA port shared with other LIFs
- C. on a physical port
- D. on an FC or FCoE port
Answer: A
NEW QUESTION 24
You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.
Which three tools do you need to complete this installation? (Choose three.)
- A. Phillips #2 screwdriver
- B. additional network cables
- C. laptop computer
- D. slide rail kit
- E. cable management tray
Answer: A,B,C
NEW QUESTION 25
What should you do to change the data protocol of a LIF?
- A. Put the LIF in another broadcast domain.
- B. Add the new data protocol to the LIF.
- C. Shut down the assigned port.
- D. Delete and re-recreate the LIF.
Answer: D
NEW QUESTION 26
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 27
You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for the deployment?
- A. Active IQ Config Advisor
- B. Interoperability Matrix Tool
- C. Active IQ Unified Manager
- D. ConfigBuilder
Answer: B
NEW QUESTION 28
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. All NL-SAS drives are divided evenly across both nodes.
- B. A SAN protocol is licensed on both nodes.
- C. All NL-SAS drives are assigned only to one of the nodes.
- D. A NAS protocol is licensed on both nodes.
Answer: A,D
NEW QUESTION 29
A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?
- A. WWPNs
- B. host names
- C. WWNNs
- D. IQNs
Answer: B
NEW QUESTION 30
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)
- A. cluster certificate
- B. server certificate
- C. root CA certificate
- D. ONTAP certificate
Answer: B,C
NEW QUESTION 31
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)
- A. ONTAP Cluster
- B. Active IQ Digital Advisor
- C. AutoSupport packages
- D. Active IQ Unified Manager
Answer: A,D
NEW QUESTION 32
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. Active IQ Config Advisor
- B. System Diagnostics
- C. Active IQ Unified Manager
- D. Cloud Insights
Answer: B
NEW QUESTION 33
Your customer plans to expand a 2-node FAS2750 switched cluster with two new controllers.
In this scenario, which two prerequisites should you examine in advance? (Choose two.)
- A. Verify that the platform of the new controllers can be mixed with the cluster's existing controllers.
- B. Verify that the hard drives of the new controllers are compatible with the old controllers.
- C. Verify that the existing cluster has a minimum 10 GB of free space for root volumes.
- D. Verify that the existing switches support the additional controllers.
Answer: A,C
NEW QUESTION 34
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
- A. Active IQ One Collect
- B. NET2
- C. Active IQ Unified Manager
- D. NetAppDocs
Answer: D
NEW QUESTION 35
You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?
- A. cluster-mgmt
- B. intercluster
- C. node-mgmt
- D. data
Answer: B
NEW QUESTION 36
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer's data? (Choose two.)
- A. Establish an SVM-DR relationship between the two clusters and activate the destination SVM.
- B. Provide cluster switches and build a 4-node cluster, then use the vol move command.
- C. Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
- D. Install SAS cables between the two clusters and use the vol move command.
Answer: B,D
NEW QUESTION 37
Click the Exhibit button.
A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new switches?
- A. a 40GbE QSFP+ to QSFP+ cable
- B. a 40GbE QSFP+ to 4x10GbE SFP+ cable
- C. a 10GbE SFP+ to SFP+ cable
- D. a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
Answer: D
NEW QUESTION 38
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. shelf connectivity
- B. node CPU utilization
- C. cluster switch cabling
- D. data switch cabling
Answer: A,B
NEW QUESTION 39
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure a remote tier.
- B. Configure aggregates.
- C. Configure protocols.
- D. Configure cluster LIFs.
Answer: B
NEW QUESTION 40
......
The easiest way to get ready for the Network Appliance NS0-184 Certification Exam
To get ready for the Network Appliance NS0-184 Certification Exam, you need to take certain steps. To make your practice easy, you can follow the steps given here. First, make a list of all the topics that you need to know for the Network Appliance NS0-184 Certification Exam. If you have not done so, then make a list of all the topics that you need to learn for the Network Appliance NS0-184 Exam, with the help of the NS0-184 Dumps. Then, prepare for the Network Appliance NS0-184 Certification Exam by practicing all the topics that you have listed. If you are preparing for the NS0-184 Exam, then you need to make a habit of practicing all the topics listed on a regular basis. The most important thing is to select the most reliable source that can help you to get ready for the exam in a short span of time. It is also recommended, to select the perfect time to practice for the Network Appliance NS0-184 Certification Exam.
Latest NS0-184 Study Guides 2022 - With Test Engine PDF: https://pass4sure.practicedump.com/NS0-184-exam-questions.html